Navegando neste Tópico:
1 usuários anônimos
Controle de Banda |
||
|---|---|---|
|
Caros Amigos,
Alguém ja conseguiu implemetar o controle de banda no linux com o htb pois estou tentando a dias é sempre o quando tento iniciar a interface o sistema me retorna o erro: Checking the config file....FAILEDThe configuration file contains errors. o meu arquido de configuração é o: ############### # eth1-qos.cfg # ################ # for how to configure and use see docs/HowTo/ class REDE_Interna { bandwidth 256; (VELOCIDADE MINIMA DO LINK DE DADOS) limit 333; (VELOCIDADE MAXIMA DO LINK DE DADOS) burst 2; priority 1; client ALAN { (o nome client e obrigatorio depois dele digite um nome referente ao ip) bandwidth 25; (VELOCIDADE MINIMA DO CLIENTE) limit 256; (VELOCIDADE MAXIMA DO CLIENTE) burst 2; priority 4; (PRIORIDADE DA BANDA PARA O CLIENTE) upload 75; (VELOCIDADE DO UPLOAD DO CLIENTE) dst { 192.168.0.2/24; (IP DO CLIENTE) }; }; }; class default { bandwidth 8; };
Enviado em: 6/7/2007 14:24
|
||
Transferir
|
||
Re: Controle de Banda |
||
|---|---|---|
|
tenta colocar o IP como unicast, eu tive problemas com isso uma vez...
Ex.: 192.168.0.2/32
Enviado em: 6/7/2007 15:51
|
||
|
"A informação mais desejada é sempre a menos disponível." - RTFM Renato Bezerra Linux User: #488220 LPIC-2 - Linux Professional Institute Certification [email protected] (81)8640-2082 |
||
Transferir
|
||
Re: Controle de Banda |
||
|---|---|---|
|
Resolvido?
Enviado em: 8/7/2007 12:37
Editado por gustavoh em 09-07-2007 08:41:52
|
||
|
Gustavo Henrique Soares dos Santos RHCE - Red Hat Certified Engineer CCNA - Cisco Certified Network Associate CCAI - Cisco Certified Academy Instructor LPIC2 - Linux Professional Institute Certication Level 2 Novell CLA - Novell Certified Linux Adm |
||
Transferir
|
||
Re: Controle de Banda |
||
|---|---|---|
|
Não funcionou amigo!
tem mais alguma sugestão do que possa esta acontecendo??
Enviado em: 13/7/2007 11:20
|
||
Transferir
|
||
Re: Controle de Banda |
||
|---|---|---|
|
eSTOU USANDO A SEGUINTE CONFIGURAÇÃO
############### # eth0-qos.cfg # ################ # for how to configure and use see docs/HowTo/ class REDE_Interna { bandwidth 256; (VELOCIDADE MINIMA DO LINK DE DADOS) limit 333; (VELOCIDADE MAXIMA DO LINK DE DADOS) burst 2; priority 1; client ALAN { (o nome client e obrigatorio depois dele digite um nome referente ao ip) bandwidth 25; (VELOCIDADE MINIMA DO CLIENTE) limit 64; (VELOCIDADE MAXIMA DO CLIENTE) burst 2; priority 4; (PRIORIDADE DA BANDA PARA O CLIENTE) upload 75; (VELOCIDADE DO UPLOAD DO CLIENTE) dst { 192.168.0.102/24; (IP DO CLIENTE) }; }; }; class default { bandwidth 8; }; Estou querendo fazer o controle de banda na maquina da maquina 192.168.0.102 quando executo o comando : htb eth0 start o sistema me retorna o seguinte erro: Applying traffic rules for device eth0 Checking the config file....FAILEDThe configuration file contains errors. alguém sabe o que pode estar acontecendo.
Enviado em: 13/7/2007 11:36
|
||
Transferir
|
||
Re: Controle de Banda |
||
|---|---|---|
|
tente usar o cbq
http://centosbr.org/site/artigos/item.php?itemid=187
Enviado em: 26/8/2007 14:59
|
||
Transferir
|
||
Você pode exibir os tópicos.
Você não pode iniciar um novo tópico.
Você não pode responder.
Você não pode editar.
Você não pode excluir mensagens.
Você não pode incluir votações.
Você não pode votar.
Você não pode anexar arquivos.
Você não pode enviar mensagens sem aprovação.



Transferir
